z400 throttle
z400 throttle
z400 or kfx or ltz throttle. Thanks!
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
if you want a easier throttle pull..this is what you do......buy/make a extender for the throttle arm.....but make shure it installs and is at the same angle as the stock un modded lever...now move the throttle body over more inward on the bars..so that the throttle lever is in the same position as it was before. This will give you more leverage....with it not beeing in your palm.
CHAD
![smile.gif](http://www.cannondaleriders.com/forums/style_emoticons/<#EMO_DIR#>/smile.gif)
CHAD
Mine was very stiff so I switched to a 400ex throttle because I always liked Honda throttles anyway but in the process of fitting the cable I found that at the throttle body the cable did not line up straight with the groove on the throttle shaft, by this I mean it was like running chain and sprockets that are out of line. The cable was having to bend and was rubbing the side of the groove as it went in and out, this made it very stiff and rough I hope that I have put this in a way that makes sense to you and I hope it helps. Out of four dales at our shop two were hard to push and were out of line the other two were very easy and they were in line.