Wanted: Any running Cannondale around $3,000
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
QUOTE
Originally posted by NRath
Maybe that was Jaspman. It was someone that wanted a second for his wife. There's the trigger. It was him- she has a Kawasaki of some kind, yours has an EX.
How's this:
???????????????Dale for Sale- ??????????????????02 Cannibal
All stock with many new OEM parts. It has a cable clutch, MC1000 ECU, and all updates required of this model. Those include Stage 8, oil line update, fuel pump boot, stator shielding update, and battery tray update. It has the older, stronger engine cases that didn??????????????????t require the motor mount update. Most people would agree these are the best engine cases and also that this is the best version of the machine to buy. It was just hooked up to D&M to recalibrate the Throttle Position Sensor and set the idle. The quad runs great. I??????????????????ve used it primarily for trail riding and raced 2 harescrambles.
Here are the brand new parts, these have never been ridden. Some of them came off another brand new quad.
-Trailwolf tires with ITP rims- Front and Rear
-Upper ball joints
-Steering tie rods and rod ends
-Handlebars and grips (stock Cannibal)
-Rear axle bearings and seals
-Chain buffer
-Fox Rear Shock
-Spark plug
-Air filter
-Heel baskets and wires
-??????????????????03 exhaust and header
These parts are nearly new, approximate hours are listed.
-Lower ball joints (5 hrs)
-Rear brake pads (5 hrs)
-Swingarm bearings (20 hrs)
-Arvin frt shocks, these are the updated ones (8 hrs)
-Stock gears with RK X-ring chain- no visible wear on teeth (20-30 hrs)
I??????????????????ve added grease zerks to the stock a-arms and to the steering stem bushing to keep them slippery. After the first oil change, I??????????????????ve always used Redline oils and kept it changed frequently. It has Evan NPG+ antifreeze. I also replaced the clutch pack about a year or so ago with the updated 8 plate clutch pack. The valve clearances have been adjusted twice and they were just checked. They were still dead on where I set them at the last adjustment. It has the original plastic that is scratched, but not broken or showing any white stress marks anywhere. I??????????????????ve gone over every piece of the quad before putting it up for sale. It doesn??????????????????t need anything. I??????????????????ve taken excellent care of this machine and it can be yours for $3200. I??????????????????m still riding Cannondale??????????????????s, I just can??????????????????t keep 2 of them.
I think you and I had left off with you wanting some pics. I was just finishing cleaning the quad nor did I have a digi-cam. Those problems are solved.
Maybe that was Jaspman. It was someone that wanted a second for his wife. There's the trigger. It was him- she has a Kawasaki of some kind, yours has an EX.
How's this:
???????????????Dale for Sale- ??????????????????02 Cannibal
All stock with many new OEM parts. It has a cable clutch, MC1000 ECU, and all updates required of this model. Those include Stage 8, oil line update, fuel pump boot, stator shielding update, and battery tray update. It has the older, stronger engine cases that didn??????????????????t require the motor mount update. Most people would agree these are the best engine cases and also that this is the best version of the machine to buy. It was just hooked up to D&M to recalibrate the Throttle Position Sensor and set the idle. The quad runs great. I??????????????????ve used it primarily for trail riding and raced 2 harescrambles.
Here are the brand new parts, these have never been ridden. Some of them came off another brand new quad.
-Trailwolf tires with ITP rims- Front and Rear
-Upper ball joints
-Steering tie rods and rod ends
-Handlebars and grips (stock Cannibal)
-Rear axle bearings and seals
-Chain buffer
-Fox Rear Shock
-Spark plug
-Air filter
-Heel baskets and wires
-??????????????????03 exhaust and header
These parts are nearly new, approximate hours are listed.
-Lower ball joints (5 hrs)
-Rear brake pads (5 hrs)
-Swingarm bearings (20 hrs)
-Arvin frt shocks, these are the updated ones (8 hrs)
-Stock gears with RK X-ring chain- no visible wear on teeth (20-30 hrs)
I??????????????????ve added grease zerks to the stock a-arms and to the steering stem bushing to keep them slippery. After the first oil change, I??????????????????ve always used Redline oils and kept it changed frequently. It has Evan NPG+ antifreeze. I also replaced the clutch pack about a year or so ago with the updated 8 plate clutch pack. The valve clearances have been adjusted twice and they were just checked. They were still dead on where I set them at the last adjustment. It has the original plastic that is scratched, but not broken or showing any white stress marks anywhere. I??????????????????ve gone over every piece of the quad before putting it up for sale. It doesn??????????????????t need anything. I??????????????????ve taken excellent care of this machine and it can be yours for $3200. I??????????????????m still riding Cannondale??????????????????s, I just can??????????????????t keep 2 of them.
I think you and I had left off with you wanting some pics. I was just finishing cleaning the quad nor did I have a digi-cam. Those problems are solved.
You sent me a PM? Did I respond? I don't remember any. Sorry about that if I got yours confused or didn't respond. Thats not like me.
But 'yes' I was looking for another for my wife. And the Lakota will be gone soon enough.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm