Page 1 of 1
Posted: Tue Aug 11, 2009 6:45 pm
by skinny
I'm looking for a good set of Harley injectors, quad is at Tims and these are hopefully my last pieces to buy. Thanks
Posted: Tue Aug 11, 2009 7:46 pm
by Kuma
I'm looking for a good set of Harley injectors, quad is at Tims and these are hopefully my last pieces to buy. Thanks
If all else fails, call your local Harley Dealer, Dealer near me had them on the shelf.
Posted: Wed Aug 12, 2009 2:47 am
by cannondale27
Summit has them also.Alot cheaper.
Posted: Wed Aug 12, 2009 9:58 am
by claas900
Just look for Pico injectors 29 lbs will be fine.
Posted: Wed Aug 12, 2009 6:11 pm
by skinny
I found some 29lb injectors on summit website. edl-3583 They are edelbrock pico injectors 29lbs/hr please let me know if these are the same as the harley injectors.
Thanks
http://www.summitracing.com/parts/EDL-3583/
Posted: Wed Aug 12, 2009 7:27 pm
by Kuma
I found some 29lb injectors on summit website. edl-3583 They are edelbrock pico injectors 29lbs/hr please let me know if these are the same as the harley injectors.
Thanks
http://www.summitracing.com/parts/EDL-3583/Looks the same, '27 or '900 may be able to tell you better if they are the same flow rate.
make sure you are aware that you have to redrill the clips to accomidate the shorter injectors, with the harleys you drill right about where the slight bend is at the bottom of the clip.
Posted: Wed Aug 12, 2009 8:56 pm
by claas900
I found some 29lb injectors on summit website. edl-3583 They are edelbrock pico injectors 29lbs/hr please let me know if these are the same as the harley injectors.
Thanks
http://www.summitracing.com/parts/EDL-3583/ Yup those are them. You could probably shop around with that part number and find a better deal if your willing to put time into. Also, Jinxx44 on here was working on a deal to get the stock ones improved you might see what he has to say?
Posted: Thu Aug 13, 2009 12:17 am
by skinny
Thanks for all the help guys!! I'll check with Jinxx44 too
Posted: Thu Aug 13, 2009 12:32 am
by peterock
The below is one area you guys need to keep in mind. I'm not sure what are stock ones are honestly, but I see the ones posted above were listed as such. Not sure if it is correct or not, but does make a difference.
Injector Impedance 14.9 ohms
Driver Type 12 V saturated circuit