Page 1 of 1

Posted: Tue Aug 10, 2010 10:39 pm
by cannondalemaine
I am looking for the atv solenoid that goes from battery to starter. My red wire broke off where the wire connects into the solenoid. Was looking to get one by this sunday because its drag race day if anyone could help it would be appreciated. Thanks

Jeff

Posted: Tue Aug 10, 2010 11:14 pm
by Canniboomer
I have a compact unit with a sheathed strain relief, and it has the same harness plug.
I've sent them to some racers back there, and after the same breakage complaints with the stock relay. I'll find some pics and email to you..

Posted: Wed Aug 11, 2010 7:50 pm
by wistech
Putting silicone on the new style relay wires providing strain relief is an R@D update from way back. Without it its just a matter of time before they break from flex. It might be a OK design for a tractor but a quad slamming up and down not so much.

Posted: Wed Aug 11, 2010 8:18 pm
by cannondale27
I also Ziptie the connectors to the battery strap making sure those small wires are left loose.

Posted: Wed Aug 11, 2010 10:04 pm
by cannondalemaine
Thanks for the tips guys!