Moto 440 Parts A-Arms, Axle, Swingarm

Message

2002CannondaleMoto440Racer · Sun Oct 23, 2011 10:09 pm

Hey everyone, so I'm trying to get my Moto 440 ATV/Quad built into a rolling chassis at least so I need these parts for it for now.
-Stock Set of Moto 440 A-Arms both upper&lower&pivot bolts with ball joints and tie rods with tie rod ends
-Stock Swingarm with bearing carrier&pivot bolt-good one made for motocross riding
-A stock Moto 440 Axle-an aftermarket moto axle will do too
-Stock Moto Steering Stem complete with bar clamp

If anyone has these parts available to sell, please let me know

fearlessfred · #2 Post by **fearlessfred** » Tue Oct 25, 2011 3:34 am

QUOTE (2002CannondaleMoto440Racer @ Oct 23 2011, 11:09 PM) <{POST_SNAPBACK}>

Hey everyone, so I'm trying to get my Moto 440 ATV/Quad built into a rolling chassis at least so I need these parts for it for now.
-Stock Set of Moto 440 A-Arms both upper&lower&pivot bolts with ball joints and tie rods with tie rod ends
-Stock Swingarm with bearing carrier&pivot bolt-good one made for motocross riding
-A stock Moto 440 Axle-an aftermarket moto axle will do too

If anyone has these parts available to sell, please let me know

i have a stock the stock swing arm ,carrier with bearings and pivot bolt. the swing arm is the later one that was beefer. dont know what there worth .if your interested i can get you some pics and you can make me an offer

2000ex · #3 Post by **2000ex** » Fri Oct 28, 2011 1:08 pm

Do you need Moto shocks? I may have the "full monty" setup for a Moto Conversion for any cannondale for sale shortly.

Easily convert that Cannibal or that spare roller you have into a full blown MX bike and or Moto "clone"

Ohlins Shocks, Moto Arms, Tierods, and even red magnesum hubs w/ brakelines and galfer rotors for sale shortly. I can toss in an axle and Ohlin's damper in there as well to complete the package.

2002CannondaleMoto440Racer · Fri Oct 28, 2011 9:14 pm

Bump...

speedracer · #5 Post by **speedracer** » Sat Oct 29, 2011 11:47 pm

QUOTE (2000ex @ Oct 28 2011, 08:08 AM) <{POST_SNAPBACK}>

Do you need Moto shocks? I may have the "full monty" setup for a Moto Conversion for any cannondale for sale shortly.

Easily convert that Cannibal or that spare roller you have into a full blown MX bike and or Moto "clone"

Ohlins Shocks, Moto Arms, Tierods, and even red magnesum hubs w/ brakelines and galfer rotors for sale shortly. I can toss in an axle and Ohlin's damper in there as well to complete the package.

Whats your price on this set-up?

2002CannondaleMoto440Racer · Thu Nov 03, 2011 11:26 pm

Still looking for a set of moto a-arms and a moto axle people. Anyone got any?

2002CannondaleMoto440Racer · Tue Dec 06, 2011 6:30 am

Bump...

2mike18 · #8 Post by **2mike18** » Wed Dec 07, 2011 12:13 am

I have a moto axle I bought used and never ended up needing. the spacers aren't orignals but the person I bought it from said they worked well.
I also have moto a-arms that need a balljoint and I do not have any spare tierods. the a-arms are complete wave rotors, mag hubs, spidles.
If you want pics I can get them but it will take a day or 2 cause all my stuff it sitting in storage.

who_gives_a6 · #9 Post by **who_gives_a6** » Wed Dec 07, 2011 12:36 am

I have a spare set of brand new Moto tie rods if ever needed. Don't have a Moto front end, only aftermarket.

joep1219 · #10 Post by **joep1219** » Wed Dec 07, 2011 5:44 am

i have a freshly painted moto arms, fresh poly new style bushings, and ball joints. wave rotors, and new asr tie rods for moto front end. all you need is the honda style adapt. fom boomer.
$565 shipped....

i also have a couple of decent moto plastics... i'm in wis. often and can meet you to save on shipping.
call if interested
219-613-7461 joe

also have a few stems, i'll have to check and see if any are for long travel or standard...