Page 1 of 1
Posted: Fri Oct 28, 2011 7:48 pm
by Kuma
Anyone have an old swingarm with the pivot bearing area trashed and just want to find it a good home?
I'm looking for the bearing carrier portion only, if anyone has one for shipping and a little for your trouble I would appreciate it
It will be for a custom swingarm for a hybrid if anyone is wondering.
Posted: Sat Oct 29, 2011 2:17 am
by beanie$440$peed
if alls u need is a bad carrier I have one roxygirl has it I could proly have him ship it
Posted: Sat Oct 29, 2011 5:11 am
by claas900
Anyone have an old swingarm with the pivot bearing area trashed and just want to find it a good home?
I'm looking for the bearing carrier portion only, if anyone has one for shipping and a little for your trouble I would appreciate it
It will be for a custom swingarm for a hybrid if anyone is wondering.
Maybe this would help?
http://jjandaracing.com/contents/en-us/d15.html
Posted: Mon Oct 31, 2011 12:33 am
by speedracer
Kuma,is the hybrid the one with the cr 500 engine?
Posted: Mon Oct 31, 2011 4:31 am
by Kuma
Kuma,is the hybrid the one with the cr 500 engine?
yep
I have ome swingarm made from an old 'dale arm using the carrier housing. because the carb is in the back, I feel that I need to go a different rout on the rear suspension. Found that I can make a gen2 cr250 swingarm fit inthe frame, so useing the casting from that and retangular tubing to graft it to the carrier housing.
I'll start a thread on the build to help motivate me and start 'splaining the build.
'900, I got to keep that link in mind if I build another swinger from steel but for now I'm keeping the aluminium swinger.
Posted: Mon Oct 31, 2011 4:32 am
by Kuma
if alls u need is a bad carrier I have one roxygirl has it I could proly have him ship it
Actually, I need a good carrier, the rest of the swingarm could be cut off to save shipping weight.
Posted: Sun Nov 06, 2011 6:38 pm
by fearlessfred
Actually, I need a good carrier, the rest of the swingarm could be cut off to save shipping weight.
did you get your carrier. because i was just inspecting the two swingarms i have and realized the earlier one is cracked and i could not sell as a good unit. so if you still need the carrier part of the swingarm , i will chop it off for 25 bucks and shipping