Page 1 of 1
Posted: Thu Aug 20, 2015 10:17 pm
by wistech
I just put in an order for a bunch of kits to rebuild the fully machined connecting rods and could use some more cores. If anyone has any junk cranks or just the rods laying around with these rods on them I have cash and will take them off your hands. As long as the rod shows no signs of bluing they are rebuildable.
Please contact me at
715 551 1498
Thanks
John
Posted: Sat Sep 05, 2015 4:26 am
by polyesterpig
John pm me your adress I have a rod that you can have Do you need the crank lobs too. I will send it for free. Really appreciate all the info & passion you provide to the CANNONDALE forum.
Posted: Sat Sep 05, 2015 1:30 pm
by wistech
Thanks for the parts. I have not needed to start rebuilding the bad pin cranks but Im sure someday it will happen so you can send them as well. Brian Kinney just cringes everytime I show up with a rod for rebuild They are **** to machine as they are not just case hardened like the forged rods.
Posted: Sun Oct 04, 2015 9:12 pm
by Canniboomer
I happen to need 5 press-on crank gears with the dowel pins... and have 4 billet rods for trade.
Posted: Tue Oct 06, 2015 1:12 am
by wistech
I might have 3 or 4 gears laying around.
Posted: Tue Oct 06, 2015 1:13 am
by wistech
I'll look.
Posted: Thu Oct 08, 2015 6:33 pm
by Canniboomer
Here are pics of the rods. No bends or twists. I was just saving for rebuilds later, but I could use Gears sooner..
Just let me know what you find tks.