Rear Hub
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
I had saved this from cannondaler before it went down but unfortunately it doesn't list the bike hubs. It just says "hubs...hardkor". Figured I'd post it anyway...
http://liveweb.archive.org/web/20130303215...ndale/Parts.xls
I could use a cush hub too.
http://liveweb.archive.org/web/20130303215...ndale/Parts.xls
I could use a cush hub too.
QUOTE (polyesterpig @ Feb 7 2015, 12:32 PM) <{POST_SNAPBACK}>
Unfortunately all that info resides on www.cannondaler.com and the forum is frozen. I wish who ever owns the site would reactivate it. Lots of cannondale motorcycle info on that site.
It is a shame about Cannondaler, there isn't much bike information on this forum. I'm pretty sure ATK owns Cannondaler and shut the forums down because of all information circulating about ATKs poor business practice and about the engines not actually being any better than a stock Cannondale engine.
QUOTE (BlackToothGrin @ Feb 7 2015, 03:23 PM) <{POST_SNAPBACK}>
I had saved this from cannondaler before it went down but unfortunately it doesn't list the bike hubs. It just says "hubs...hardkor". Figured I'd post it anyway...
http://liveweb.archive.org/web/20130303215...ndale/Parts.xls
I could use a cush hub too.
http://liveweb.archive.org/web/20130303215...ndale/Parts.xls
I could use a cush hub too.
Thanks for posting that, some good info on that list.
Unfortunately the Hardkor hubs are for the quads. But it does list that RAD made bearing carriers so they do have some experience with Cannondales.
I'm determined to figure out a cush hub solution sometime before this spring. I'll let you know what I figure out.
Just out of curiosity,I sent ATK an e-mail last night. Here was the response. (at 10:00 pm CST)
Ok
Sent from my iPhone
On Feb 7, 2015, at 8:29 PM, Mark wrote:
We can't access the forums. A lot of guys from Cannondale Riders would like to access the motorcycle info.
----- Original Message -----
From: Sales
To: 'Mark
Sent: Saturday, February 07, 2015 10:23 PM
Subject: RE: cannondaler.com
Mark-
I was on it today. Is it not working for you?
Thanks
ATK Sales
From: Mark
Sent: Saturday, February 07, 2015 9:06 PM
To: atkparts@atkusa.com
Subject: cannondaler.com
Can you reopen CANNONDALER.COM, please
Thanks;
Ok
Sent from my iPhone
On Feb 7, 2015, at 8:29 PM, Mark wrote:
We can't access the forums. A lot of guys from Cannondale Riders would like to access the motorcycle info.
----- Original Message -----
From: Sales
To: 'Mark
Sent: Saturday, February 07, 2015 10:23 PM
Subject: RE: cannondaler.com
Mark-
I was on it today. Is it not working for you?
Thanks
ATK Sales
From: Mark
Sent: Saturday, February 07, 2015 9:06 PM
To: atkparts@atkusa.com
Subject: cannondaler.com
Can you reopen CANNONDALER.COM, please
Thanks;
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
I know for a fact that someone had RAD Mfg made them a Cush drive hub for the cannondale motorcycle. It was a black hub on an enduro, not a motard. I also remember the bike was for sale soon after he had the hub manufactured. He sent a bare cannondale rear hub to RAD mfg so they could get the dimensions. Maybe the person you are dealing with isn't aware that they made one before. I have an extra new rear hub I could send them if you need me to. Just pm me.