2001 FX 400 Troubles
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Wow so this is a pretty in depth repair then! Black widow does not offer these services like Timbo does? Is the machining for new bearings and stuff needed because its an older 01 motor? Would it be worth my while to buy a new motor if their even available?? And one more question any ideas on pricing? just a guestimate?
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Timbo invented these services.You would have to ask BlackWidow if they have a CNC mill in their shop.Yes 01 motors had a weak crankbearing.Is possible though that original motor isnt in there.Many were changed.Take some close up pics of motor.My guess for motor totally updated and fixed $2000+.Any motor you buy will put you in same situation you are now unless you are Positive all the updates are done.But they are around.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Well guys i have decided to sell the quad.
I am going to start by asking $2000 obo. Let me know if your interested. As i stated above the motor must be rebuilt to run. I am Located in St. Peters Missouri. Names Dave and my email is
crznlo93@hotmail.com Thanks.
Heres some stuff it has though:
>Brand new GNCC Holeshots front and rear
>ITP Black Rims
>HMF Exhaust
>No Toil Air Filter
>Aftermarket rear Hubs
>Tag handlebars
>Moose Black Hand Guards
>Moose Black Shock Covers
>Black Front and Rear AC Racing Bumpers
>Braided Brake Lines
>New Ball joints
>#8 updated wireing harness
>S1000 ECU and throttle body
I am going to start by asking $2000 obo. Let me know if your interested. As i stated above the motor must be rebuilt to run. I am Located in St. Peters Missouri. Names Dave and my email is
crznlo93@hotmail.com Thanks.
Heres some stuff it has though:
>Brand new GNCC Holeshots front and rear
>ITP Black Rims
>HMF Exhaust
>No Toil Air Filter
>Aftermarket rear Hubs
>Tag handlebars
>Moose Black Hand Guards
>Moose Black Shock Covers
>Black Front and Rear AC Racing Bumpers
>Braided Brake Lines
>New Ball joints
>#8 updated wireing harness
>S1000 ECU and throttle body
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
QUOTE (Thefirst01 @ Jan 30 2008, 07:04 PM) <{POST_SNAPBACK}>
Well guys i have decided to sell the quad.
I am going to start by asking $2000 obo. Let me know if your interested. As i stated above the motor must be rebuilt to run. I am Located in St. Peters Missouri. Names Dave and my email is
crznlo93@hotmail.com Thanks.
Heres some stuff it has though:
>Brand new GNCC Holeshots front and rear
>ITP Black Rims
>HMF Exhaust
>No Toil Air Filter
>Aftermarket rear Hubs
>Tag handlebars
>Moose Black Hand Guards
>Moose Black Shock Covers
>Black Front and Rear AC Racing Bumpers
>Braided Brake Lines
>New Ball joints
>#8 updated wireing harness
>S1000 ECU and throttle body
I am going to start by asking $2000 obo. Let me know if your interested. As i stated above the motor must be rebuilt to run. I am Located in St. Peters Missouri. Names Dave and my email is
crznlo93@hotmail.com Thanks.
Heres some stuff it has though:
>Brand new GNCC Holeshots front and rear
>ITP Black Rims
>HMF Exhaust
>No Toil Air Filter
>Aftermarket rear Hubs
>Tag handlebars
>Moose Black Hand Guards
>Moose Black Shock Covers
>Black Front and Rear AC Racing Bumpers
>Braided Brake Lines
>New Ball joints
>#8 updated wireing harness
>S1000 ECU and throttle body
Thats a bummer.Nice quad.I have a02 speed hydro clutch running un-updated motor I could part with reasonable,maybe that would help you out?
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm