post pics of your cdales

Message

2mike18 · #41 Post by **2mike18** » Wed Jul 23, 2008 12:20 am

I wondered about those seat covers and they do look good. nice machine

rolloutracing · #42 Post by **rolloutracing** » Wed Jul 23, 2008 10:26 pm

They are great covers. I have been doing work with them for years now and have never had a problem.

Eric

Haz-Matt · #43 Post by **Haz-Matt** » Thu Jul 24, 2008 12:34 am

Who makes the seat cover and is it made just for a dale? Or is it from another quad. Thanks

aroracer72 · #44 Post by **aroracer72** » Thu Jul 24, 2008 7:56 am

Heres my first dale thats long gone and my second dale i bought off of haydug.
Chad

aroracer72 · #45 Post by **aroracer72** » Thu Jul 24, 2008 7:57 am

the rest of the pics......

rolloutracing · #46 Post by **rolloutracing** » Thu Jul 24, 2008 5:39 pm

Verdepowersports makes the seat cover and they make them for most ATV's and dirt bikes. I brought them my seat off the Dale since they wern't sure if they had the template for it.

Eric

mortondale21 · #47 Post by **mortondale21** » Sun Jul 27, 2008 7:16 am

hey eric how did those fullbores mount up? pretty easy? they make those dales look mean. nice quad

rolloutracing · #48 Post by **rolloutracing** » Mon Jul 28, 2008 9:42 pm

The plastic mounts up really easy. The front uses two l brackets that mount to a stock locations and then screws into a few of the same holes as the stock plastic. The rear is even easier. I can have all the plastic off in about a minute with the Fullbore. Way quicker than what it took before.

Eric

gml1998 · #49 Post by **gml1998** » Tue Jul 29, 2008 2:25 am

This is my 03 Speed .I bought it from Cobradaler in the fall of 07.

This is my 02 Cannibal LE,also bought last fall.It ran for about 10 minutes before it quit.I still need to get head ported then it can start going back together.Looks like it will be a fall/winter project.

I have a set of new silver plastic with Glamis graphics and a new Glamis seat that I think I will put on the Cannibal when it is done.

SlOoT · #50 Post by **SlOoT** » Fri Aug 01, 2008 6:10 pm

Here is my collection, plus 2 customer quads.