plastics.....

Message

kevin444 · #1 Post by **kevin444** » Sat Jan 10, 2009 9:03 am

jsut got a stupid but honest question. will speed plastics bolt up to a cannibal? and if not what is the diffrence?

thanks...

kevin444 · #2 Post by **kevin444** » Sat Jan 10, 2009 9:08 am

QUOTE (kevin444 @ Jan 10 2009, 01:03 AM) <{POST_SNAPBACK}>

jsut got a stupid but honest question. will speed plastics bolt up to a cannibal? and if not what is the diffrence?

thanks...

oh, can the the handle bars bolt up as well? what makes a speed a "speed" and vice-a-versa.....

2000ex · #3 Post by **2000ex** » Sat Jan 10, 2009 11:58 am

All the plastics are the same, they will bolt right up. Same for the bars.

SlOoT · #4 Post by **SlOoT** » Sat Jan 10, 2009 1:56 pm

Difference between Speed and Cannibal is:

-Speed has Ohlins in the front
-Speed has ITP Holeshot tires
-Speed has TAG handlebars
-Speed has 11.500 RPM rev limit, Cannibal 10.500
-Speed has different colors and seat

However, some Cannibals also came with Ohlins in the front and Holeshot tires. And I have also seen a few Speeds with Cannibal frontshocks.

kevin444 · #5 Post by **kevin444** » Sat Jan 10, 2009 6:37 pm

thankyou you 2.....is the rev limited by the computer?

claas900 · #6 Post by **claas900** » Sat Jan 10, 2009 6:50 pm

On the bars Speed and Cannibal have 7/8" bars
Moto,Blaze and Glamis have 1-1/8 bars or fat bars.

The pc is what determent that rev limit. Witch you can change with the right software.

kevin444 · #7 Post by **kevin444** » Sat Jan 10, 2009 7:06 pm

i've got a cannibal...would a speed computer be worth buying? any advantages other than the rev limit?

MyCannibal · #8 Post by **MyCannibal** » Sat Jan 10, 2009 7:46 pm

All you need is the D&M kit (which is just a software disc and cpu cable)which you can purchase through the site sponsors...once you have that then you can change the parameters(i.e.-different maps with diff rev limits and such) in the ecu...you'll also need a PC in which to use the software preferrably a old laptop(or new)...you can do throttle cals and idle adjustments with this software also...Its definitely a must have in my opinion...it'll be your best friend...it was around 200.00 when I bought it years ago...not sure what they go for now.

MX Quad Dad · #9 Post by **MX Quad Dad** » Sun Jan 11, 2009 2:13 pm

Speed's had hyd clutch also. earlier cannibal's had cable. did the later cannibal's have Hyd?