kill switch qestion
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
You can follow the two wires from the existing run/stop switch, and disconnect one at the harness. Then connect your new kill switch to those leads.
Or, you can replace your stock run/stop switch with the new kill switch, and use either the tether or keyswitch to turn off the machine. If your new switch breaks the circuit when the tether is yanked, then yes that is the one you need.
Or, you can replace your stock run/stop switch with the new kill switch, and use either the tether or keyswitch to turn off the machine. If your new switch breaks the circuit when the tether is yanked, then yes that is the one you need.