03 moto

Bring all of your questions about the Cannondale quad here!
Post Reply
Message
Author
raremoto440
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#1 Post by raremoto440 »

I still can not get any power to my 03 moto. The battery is charged, and the fues is good. When I turn the key on the tail light works but flickers. When you turn the kill switch on the light dims ,and when you hit start button the ecm clicks and the solinoid buzzes but thats it. Need help with this please.

gerk101
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#2 Post by gerk101 »

QUOTE (raremoto440 @ Aug 12 2009, 11:52 PM) <{POST_SNAPBACK}>
I still can not get any power to my 03 moto. The battery is charged, and the fues is good. When I turn the key on the tail light works but flickers. When you turn the kill switch on the light dims ,and when you hit start button the ecm clicks and the solinoid buzzes but thats it. Need help with this please.

i had a simular problem it changed my voltage rectifier and it took care of it . if not sounds like the stator could be shorting out check the wires behind it.

MyCannibal
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#3 Post by MyCannibal »

Is it a brand new battery?..sounds like a bad battery.

cdale490
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#4 Post by cdale490 »

QUOTE (MyCannibal @ Aug 13 2009, 12:29 PM) <{POST_SNAPBACK}>
Is it a brand new battery?..sounds like a bad battery.

check your ground wires

gerk101
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#5 Post by gerk101 »

QUOTE (MyCannibal @ Aug 13 2009, 12:29 PM) <{POST_SNAPBACK}>
Is it a brand new battery?..sounds like a bad battery.

sounds like the stators shorting and draining the battery

raremoto440
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#6 Post by raremoto440 »

QUOTE (gerk101 @ Aug 13 2009, 11:37 PM) <{POST_SNAPBACK}>
sounds like the stators shorting and draining the battery

Thanks for the help is was the stator I changed it and put new battery in and it rips again.

NRath
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#7 Post by NRath »

Where was the nick in the wire? At the clip? there was an update to add some sheathing to the wire as it goes through the clip.

Post Reply