Hey Guys
I shut my dale down and when I went to start her back up nothing(no status lights or clicking, headlight work tho). I checked out the ignition start and run buttons all are fine and connected. I'm thinking its the main power relay.
Anybody agree?
Thanks!!
No Status Lights or Start
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
The ATV can power up and crank over with a loose or missing main relay. Maybe work the Run-Start switch up-down to see if it wakes up, or test for continuity,...that switch does get corroded or loose inside and wears out over time -- same with the ignition Keyswitch at the most-used position 1. I've sent out several replacements of those parts over the past few years.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
QUOTE (Canniboomer @ Mar 29 2013, 12:03 PM) <{POST_SNAPBACK}>
The ATV can power up and crank over with a loose or missing main relay. Maybe work the Run-Start switch up-down to see if it wakes up, or test for continuity,...that switch does get corroded or loose inside and wears out over time -- same with the ignition Keyswitch at the most-used position 1. I've sent out several replacements of those parts over the past few years.
I did check the run/stop and key switch. They both check out. I also tried bypassing them all together and I still couldn't get the status lights to light up or the quad to start.
.......But I never checked the start button, I had forgotten that the status lights don't light until they you hit the start button. I thought they light as soon as the key was turned into "On". Long story short I will be needing a new start switch.
Thanks guys