what other parts fit and work well
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
i have a throttle/cable from an ltr450 on mine, set of rath pro pegs(cannondale mounts) and a trx450 front master cylinder along with the 400ex rear hubs...
the 250r plastics will only work if you can find the aftermarket subframe/fuel tank to accept them..
also the front ends from a 250r/400ex will bolt the cannondale frame but you will need to use the r/ex spindles, hubs and brakes..
the 250r plastics will only work if you can find the aftermarket subframe/fuel tank to accept them..
also the front ends from a 250r/400ex will bolt the cannondale frame but you will need to use the r/ex spindles, hubs and brakes..
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm