What can you build?

Message

Sand_Blaster · #1 Post by **Sand_Blaster** » Mon Sep 26, 2005 3:22 am

Tim can you do 3mm strokers or just 2mm?
You can reangle the injectors right? Does it provide a noticable difference?
I want a monster motor that is still reliable but still runs on pump gas.
What is the price of your stroke cranks anyways?
thanks

timbomoose · #2 Post by **timbomoose** » Tue Sep 27, 2005 4:54 am

Sorry do not do 3mm stroker cranks.Only 2.2mm.Limiting factor is using stock pistons.Only so much material can be machined safely and still have reliability.Stroker cranks run $475 which includes machining piston to desired compression.Will in the future offer 6mm stroker with custom piston,but will not be released for production until reliability is tested.I do reangled injectors$75. Reangle job does very little for performance just helps mostly for faster starting when mapped in.Best bang for buck is stock bore stroker because can use stock piston.

theJeStEr1340 · #3 Post by **theJeStEr1340** » Tue Sep 27, 2005 1:22 pm

QUOTE

Originally posted by timbomoose
Best bang for buck is stock bore stroker because can use stock piston.

this will give you plenty of power, ask anyone who has one.

Psychosis · #4 Post by **Psychosis** » Tue Sep 27, 2005 9:17 pm

Oh yeah. Definately more than even the ATK's. Plenty noticeable.

Sand_Blaster · #5 Post by **Sand_Blaster** » Tue Sep 27, 2005 11:53 pm

Thats what my dad has (awsome btw)

But I would like to beable to smoke him at drag raceing.

comander420 · #6 Post by **comander420** » Sun Oct 02, 2005 1:35 am

Is his ported out all the way through??

TucsonCannibal · #7 Post by **TucsonCannibal** » Mon Oct 03, 2005 7:30 pm

Can you do a 14:1 piston with the 450 stroker?

gift3t · #8 Post by **gift3t** » Mon Oct 03, 2005 8:17 pm

is machining the piston required for head clearance? what would compression be without any machining? so if i buy one of tim's stroker cranks, i will need all my pistons i use machined by tim? do these stroker cranks come balanced with the z400 bearing?
thanks for the info!!!!!!!

Sand_Blaster · #9 Post by **Sand_Blaster** » Wed Oct 12, 2005 12:02 am

QUOTE

Originally posted by comander420
Is his ported out all the way through??

No his is not ported.
Just HMF pipe, Boomer Air box Mod, Tims 2mm stoker, Glamis Map.