Trinium map
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
I use it with a ported 450 storker with a full fmf and an open air filter and full flow tank kit and ended up with about 48hp with a good safe afr and a flow rate of 1925. Your results may vary and there are probably a couple more out there that may be closer to what you have. At least that map would get you alot closer than you are now... I would bet that moto speed is all over the place lean and rich.
As soon as you do porting it is time to ditch a stock or hybrid map.
Just my two cents!
Ray
As soon as you do porting it is time to ditch a stock or hybrid map.
Just my two cents!
Ray
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Hi Ray,
Thanks for your input. I'll have to give it a try. Was your 48hp at the rear wheels?
I don't know if you like to Motocross, but I am planning to be at open practice at pima motor sports park this Sat and it would be great to meet you and have another dale at the track! (Open practic is 8:30am to 2pm costs $25 Can get more info at www.pimamotorsports.com)
Thanks
God bless...
Mark
Thanks for your input. I'll have to give it a try. Was your 48hp at the rear wheels?
I don't know if you like to Motocross, but I am planning to be at open practice at pima motor sports park this Sat and it would be great to meet you and have another dale at the track! (Open practic is 8:30am to 2pm costs $25 Can get more info at www.pimamotorsports.com)
Thanks
God bless...
Mark
QUOTE (rayspeed @ Jan 28 2008, 09:31 PM) <{POST_SNAPBACK}>
I use it with a ported 450 storker with a full fmf and an open air filter and full flow tank kit and ended up with about 48hp with a good safe afr and a flow rate of 1925. Your results may vary and there are probably a couple more out there that may be closer to what you have. At least that map would get you alot closer than you are now... I would bet that moto speed is all over the place lean and rich.
As soon as you do porting it is time to ditch a stock or hybrid map.
Just my two cents!
Ray
As soon as you do porting it is time to ditch a stock or hybrid map.
Just my two cents!
Ray
To the wheels... but that one is down at the moment with a split liner! Do you need a hook up for a dyno here in town? $75 for a two hour minimum and I think two dales can be dialed in in that time with enough hands. I might have one in the group that needs tweaking if you want to team up.
Will kick around coming out... got alot going on and was hoping to change that liner this weekend. Do you have to have a kill switch there?
Ray
Will kick around coming out... got alot going on and was hoping to change that liner this weekend. Do you have to have a kill switch there?
Ray
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Hi Ray,
That's cool because if you are getting 48 to the wheels, it is quite posible that you are making 53 to 58hp at the crank! PMP does require a kill switch. I'll have to let you know about the dyno. I might be ready to do that later on in the spring. I can't believe a liner split on you! ny idea how that happened?
I hope you can make it saturday.
God bless...
mark
That's cool because if you are getting 48 to the wheels, it is quite posible that you are making 53 to 58hp at the crank! PMP does require a kill switch. I'll have to let you know about the dyno. I might be ready to do that later on in the spring. I can't believe a liner split on you! ny idea how that happened?
I hope you can make it saturday.
God bless...
mark
QUOTE (rayspeed @ Jan 29 2008, 03:44 AM) <{POST_SNAPBACK}>
To the wheels... but that one is down at the moment with a split liner! Do you need a hook up for a dyno here in town? $75 for a two hour minimum and I think two dales can be dialed in in that time with enough hands. I might have one in the group that needs tweaking if you want to team up.
Will kick around coming out... got alot going on and was hoping to change that liner this weekend. Do you have to have a kill switch there?
Ray
Will kick around coming out... got alot going on and was hoping to change that liner this weekend. Do you have to have a kill switch there?
Ray
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
I use the terminator map on my dale. I made 48.44 HP. HMF, Asso stock bore, stock stroke, cyclone w/UNI, and wistech porting. I have no idea what my cam timing really is, but its set to what should be the 106/106. The cams are the gray Megacycle ones (gray intake). The afr is good and straight. Flowrate is set to 2100 and offset is .88.
QUOTE (Gibson265R @ Nov 7 2009, 03:22 AM) <{POST_SNAPBACK}>
I use the terminator map on my dale. I made 48.44 HP. HMF, Asso stock bore, stock stroke, cyclone w/UNI, and wistech porting. I have no idea what my cam timing really is, but its set to what should be the 106/106. The cams are the gray Megacycle ones (gray intake). The afr is good and straight. Flowrate is set to 2100 and offset is .88.
can anyone tell me what the rev limiter is set at in the trinium map