Piston Kit Pricing

Message

timbomoose · #1 Post by **timbomoose** » Thu May 03, 2007 12:31 am

Sorry to say piston kit pricing will be going up because of increased cost in sleeves. From now until the end of May you can still get the piston kits at the same price.As some know complete kits are on backorder for 97mm sizes.I have over 50 pistons on the shelf and just wiating on sleeves which should be availible in 1-2 weeks.Here's a breakdowm on pricing:

97mm 450cc kit stock crank or 468cc falicon stroker $399 after May $430.
This kit is a Cp piston with coated skirts,chrome wrist pin,rings ,circlips,and high quality nicalsil aluminum liner.This 97mm 450 kit along with eliminator porting and cyclone puts out 53.74 on pump gas and 55+ with ultimate4 race gas see link http://www.cannondaleriders.com/forums/ind...showtopic=18867 Comparison is between atk wwe450 against cp 450 ported. Definately best buy on the market for the best price.Available in 12.5-1 and 13-1 compresion.

97mm 467 piston kit. $399 after May $430
This kit is for timbo 2mm or 2.2mm stroker cranks.This kit is also a Cp piston with coated skirts,chrome wrist pin,rings ,circlips,and high quality nicalsil aluminum liner.Has seen upto 57hp on the dyno with porting and cyclone.

95mm CP piston kits for 2.2mm timbo stroker includes Cp piston,chrome wrist pin,coated skirts and nicasil liner only $325

96mm piston kit for timbo 6mm stroker(485cc) $399 after may$420
97mm piston kit for timbo 6mm stroker(495cc) $450 " " " " " $475
98mm piston kit for timbo 6mm stroker(505cc) $525 "" " " "$525
All kits come with chrome wrist pin,coated skirt(some coated dome)high quality nicasil liner for superior wear and cooling,and are CP pistons accept for 98mm for 505 they will have cast iron liner.

Also available on special now with limited quantity! 98mm wwe style piston gas ports with 12.5,13-1,or 14-1 compression. Comes with gas ported piston,rings,clips and THICK & BEEFY CHROME PLATED WRISTPIN and cast iron sleeve ONLY $350!!!!!!!!!!!!!!!!!!Thats right $350!!!! Limited supply.

Also avialable and on the shelf 98mm cp piston,rings,chrome wrist pin,clips, and cast iron sleeve for timbo stroker 12.5-1 or 13-1 compression makes a 478cc. 1 kit only $399

Coming Soon! 14.5-1 compression Cp piston kits.Pm or call for pricing.Limited availability.

All kits include piston,rings,liners(sleeves),chrome wrist pins, and clips. Chrome wrist pins are made for reduced friction and gualling. These are all the BEST KITS ON THE MARKET and for the BEST PRICE!!! Shop around and see for yourself.BUY NOW FOR THE DISCOUNTS!

claas900 · #2 Post by **claas900** » Thu May 03, 2007 12:41 am

Tim do theses not come with head gasket O-ring and the water O-ring that goes on the liner?

timbomoose · #3 Post by **timbomoose** » Thu May 03, 2007 2:33 am

Kits do not come with gasket O-ring and the water O-ring that goes on the liner.Stock gaskets work all nicasil liners and most cast iron liners.The other good thing is these gaskets are almost always reusable.Piston and sleeves can be purchased seperately.

HouserCannondale · #4 Post by **HouserCannondale** » Sat May 05, 2007 7:53 pm

does the 95mm bore come with increased compression? looking for max compression with the 2.2mm falicon.

timbomoose · #5 Post by **timbomoose** » Tue May 08, 2007 5:28 am

Didn't have any 95mm made for that compression.Can get made around 5 week delivery.Pm or call if interested.Thanks,Tim

claas900 · #6 Post by **claas900** » Tue May 08, 2007 9:30 pm

Tim will you still honer the old price for my 495 kit beings it was decided on what I was going to do long ago? Or do I need to make a payment on it now to honer the old price?..Thanks Patrick in Ca.

timbomoose · #7 Post by **timbomoose** » Wed May 09, 2007 10:32 am

Your order was put in before new prices came so will be the cheaper price.