timbo maps

Message
Author
timbomoose
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#1 Post by timbomoose »

1st map extreme is used for ported 2.2mm strokers with airbox. Parameters for 448cc(95mm piston) 2360 1.05 offset 467cc (97mm piston) 2300flowrate 1.1 offset.
4th map the LAFEMM is a softer map for the same setup.

2nd map terminator is for an open airbox setup (example cannonboomer or cyclone pod filter) for 2.2mm ported strokers .Parameters for 448cc (95mm piston) 2330 flowrate 1.05 offset for 467 (97mm piston) 2275 flowrate 1.1 offset.

3rd map exterminator2.THIS IS ONLY FOR HARLEY INJECTORS!!!!Map is made for 495cc or 505cc ported open air set 67mm stroke.495 cc 2620 offset .88 505cc 2560 .88.Running this map with stock injectors can be damaging!



These maps are all from gen3 porting made with factory fmf ti pipes 93 octane gas.
extreme 448cc 49.5hp 467cc 52 hp
terminator 448cc 52 hp 467cc 55 hp
exterminator2 495cc 58.5 505cc 60 hp
Dyno hp at atv rear wheels hoosier tires rounded off to the nearest .5 hp.

All settings are ROUND ABOUT. Fuel pressure and injector flow varies from machine to machine which will cause differences in settings.Pipes and cam timing will also affect maps!Go rich then to lean for adjusting.If running hot richen up and/or run better gas.

jtracker
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#2 Post by jtracker »

Hey,
What map did you put in stephens cannondale?

timbomoose
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#3 Post by timbomoose »

terminator

Gibson265R
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#4 Post by Gibson265R »

can someone please repost or directly e-mail me the terminator map. I cant get it to download. PLEASE!!!!

cannondale27
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#5 Post by cannondale27 »

QUOTE (Gibson265R @ Aug 19 2009, 12:00 PM) <{POST_SNAPBACK}>
can someone please repost or directly e-mail me the terminator map. I cant get it to download. PLEASE!!!!


Try this:
[attachment=8763:terminator.ccf]

Gibson265R
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#6 Post by Gibson265R »

Thanks

claas900
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#7 Post by claas900 »

I'm trying to get the exterminator2 map but the link wont work.

Kuma
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#8 Post by Kuma »

QUOTE (claas900 @ Oct 12 2009, 03:19 PM) <{POST_SNAPBACK}>
I'm trying to get the exterminator2 map but the link wont work.


Here you go!
[attachment=9148:exterminator2.ccf]

311racer
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#9 Post by 311racer »

whats the exterminator2 map

Kuma
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#10 Post by Kuma »

QUOTE (311racer @ Oct 12 2009, 05:56 PM) <{POST_SNAPBACK}>
whats the exterminator2 map


Map made for 495, 505 harley injectors.

"3rd map exterminator2.THIS IS ONLY FOR HARLEY INJECTORS!!!!Map is made for 495cc or 505cc ported open air set 67mm stroke.495 cc 2620 offset .88 505cc 2560 .88.Running this map with stock injectors can be damaging!"



Post Reply