Status Light Kits
Status Light Kits
Just wanted to post and show status light kits now available through Canniboomer. Took awhile to get these assembled, but the finished product is very cool. The billet mount kit bolts right up to the stock MX handlebar clamps. No wiring needed, just plug them into your accessory harness plug on a bike or quad and you are good to go.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
These are MUCH brighter than normal status lights. You will notice them quite readily while riding in full daylight. In fact, you might actually catch yourself "hoping" for some light-activating problem, just to see the nice colors!
The yokes are custom reshaped from aftermarket early billet mounts that I found at TrailTech. Easy E has done a superb job of assembly as you can see. As long as your top-clamps have a flat surface to bolt to, these are a quick and high-tech upgrade.
For Badvox, there will finally be a no-brainer installation!
How much? We have to sleep on that and check on some longterm supply issues.... we just wanted to get the early pics out, since some of you have started thinking about these various versions lately, and may wish to compare features and price. But they won't be expensive, considering the high quality craftsmanship, labor involved, and the cost of the baseplate, etc.. More to come on this soon, either here on in the sponsors section.... and we'll have some lit-up pics also.
The yokes are custom reshaped from aftermarket early billet mounts that I found at TrailTech. Easy E has done a superb job of assembly as you can see. As long as your top-clamps have a flat surface to bolt to, these are a quick and high-tech upgrade.
For Badvox, there will finally be a no-brainer installation!
How much? We have to sleep on that and check on some longterm supply issues.... we just wanted to get the early pics out, since some of you have started thinking about these various versions lately, and may wish to compare features and price. But they won't be expensive, considering the high quality craftsmanship, labor involved, and the cost of the baseplate, etc.. More to come on this soon, either here on in the sponsors section.... and we'll have some lit-up pics also.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
.....
man it figure these would come out now after i bought the old style 5mm....and i had the same problem as tooth and nail...