Hey Dave,
I have an 02 X440 and wanted to know if the plastic is still available for this bike, specifically the rear fender and the side shrouds for the short radiator.
Additionally will your intake work with the dual filter set up and the improved petcock system for the fuel?
It also has the hardware for the kickstand on the swingarm, are there kickstands for this type still?
Also do youn have the improved kickstands for the 03 and on 400E's?
2TJedi
02 X440
-
Canniboomer
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Yep I have the rear black fenders,........ and the silver side-shrouds for the X440s.
The Direct-mount Intake for the X440s will replace BOTH of the stock filters -- It's a smaller K&N only, with Outerwear.
But it has worked amazingly well in both dusty and grimey conditions, and up to a medium ported 450 with a non-modded throttle body. You still have to pull the fueltank to access the filter,
but you can easily extend the servicing interval.
Aftermarket kickstands are still working....
Cannondale kickstand parts?, yes in stock, except for the long leg.... but I will also check on that, or for a take-off. thanks. pacrimdm@msn.com
The Direct-mount Intake for the X440s will replace BOTH of the stock filters -- It's a smaller K&N only, with Outerwear.
But it has worked amazingly well in both dusty and grimey conditions, and up to a medium ported 450 with a non-modded throttle body. You still have to pull the fueltank to access the filter,
but you can easily extend the servicing interval.
Aftermarket kickstands are still working....
Cannondale kickstand parts?, yes in stock, except for the long leg.... but I will also check on that, or for a take-off. thanks. pacrimdm@msn.com