Page 2 of 2
Posted: Sat Oct 23, 2010 3:05 am
by dalewannbe
27's front end was buttery smooth.
Posted: Sat Oct 23, 2010 3:13 am
by dalewannbe
dalewannbe,....the OD of the bushings are 13/16", and the ID of the stock pipe ends are already the same 13/16",....so you just need to clean up the ends of your crosscuts to that same diameter.
But also CALL me. There have been 2 reports of these balljoints tightening up after water crossings,...(first incidents per supplier after 15 years) so each joint is now getting pre-checked for ample grease. Please call during install for other misc info as needed,.... thanks Dave 360 574-2613.
I'll call you when I tackle this project, it probably won't be for a while.
Posted: Sat Mar 05, 2011 4:37 am
by dalewannbe
I got my kit and I am going to be giving this a try.
Posted: Sun Jun 30, 2013 4:25 pm
by speedracer
I am in need of new balljoints but not looking for stockers,is this kit still around for 02 speed arms?Thanks.