UGH D&M trouble
I was trying to load a moto map into a friends cannibal tonight. To start my cable a optimum cable the green light is on as soon as you plug it into the plug on the quad, with the key on but as soon as you plug it into the serial port the light goes out but the first time I was able to get the faults. After that I tried loading the moto map but I keep getting the 125 error. I tried the cable on my dale and no light but was able to get the error faults to work. Now the other quad wont start or kick the fuel pump on. I'm confused and hoping I didnt brick the ecu some how.
Thanks
Shawn
Thanks
Shawn
QUOTE (claas900 @ Jul 8 2011, 10:28 PM) <{POST_SNAPBACK}>
I've never had the light problem, But I have forgot many times with working with other bikes to make sure I select there bike/ECU.
I did choose the correct ECU, the other bad thing is they are both my ECU's one was my spare, the one that came with the my friends quad was toast so I loaned it to him to see if that was the problem now I'm afraid I toasted my spare.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
QUOTE (cannondale27 @ Jul 9 2011, 04:25 PM) <{POST_SNAPBACK}>
Check the pins in the cable maybe one pushed back.
Tried it no luck.
QUOTE (Scooter @ Jul 12 2011, 07:40 AM) <{POST_SNAPBACK}>
It sounds to me like you have lost the hex in the ecu try to reload it then the map. Do not forget to hold down on the start button with the starter solinoide disconected while you are reloading the hex if you do not have a newer harness.
Scooter
Scooter
I cant get it to "talk" now I keep getting the 125 error.