Maps for complete stock setup

Message

SlOoT · #1 Post by **SlOoT** » Mon Aug 19, 2013 4:19 pm

What maps can I use on a completly stock setup?
432cc, airbox, '02 exhaust, no porting.

It's for mx racing, but I need to keep the stock '02 exhaust coz of the noise level.

I currently use a cannibal map.

Thanks

kdeal · #2 Post by **kdeal** » Mon Aug 19, 2013 11:47 pm

Use the stock Speed map. A little hotter and extra revs.

SlOoT · #3 Post by **SlOoT** » Tue Aug 20, 2013 6:17 am

Ok, thanks.

I thought the cannibal and speed maps were the same except for the rev limit?

Can I use something like a moto map or moto/speed map, or will that run to rich?

Thanks

kdeal · #4 Post by **kdeal** » Tue Aug 20, 2013 9:35 pm

You can, but you will have to lean it out some to use with that 02 exhaust system. The Speed map is definitely hotter, especially on top. The best custom map would be a Speed / Moto combo map. It uses the Moto bottom end with the Speed top end.

SlOoT · #5 Post by **SlOoT** » Thu Aug 22, 2013 8:08 am

I have compared both maps in procal and they are 100% the same except for the rev limit.
Cannibal map is 10800 and speed 11500 rev limit.

SlOoT · #6 Post by **SlOoT** » Fri Aug 23, 2013 1:46 pm

Did some more research on the maps,

The stock moto map actualy gives LESS fuel then a cannibal or speed map.