Map Settings

[who_gives_a6]

Trying to help a friend out and just can't seem to get a close map to get it running right. Tried variations of stock maps, the trinium, and another I have on file too. Starts and idles great with trinium but we can't get it to lose a bog when running. It'll be too rich so I'll decrease the fuel in small increments and it'll change to super lean condition all the sudden and not want to start.

I can't find an exact map setup anywhere so need a suggestion. Engine is freshly built.

432cc
Lightly ported head by Travis from ATK awhile back. Mostly a clean up job.
Throttle body is stock.
Custom exhaust similar to full HMF.
Has a custom dual ram air intake with removed airbox.
Stock timing.
New and smooth flowing injectors.
Gutted and new fuel lines.

All stock based maps just wouldn't even run right but the trinium seems too much in the upper rpms. Does anyone have a map for a similar application?

[yamadjs08]

What flow rate and offset settings have you been trying?

[who_gives_a6]

Got it solved but thanks. Turns out the fuel pump wasn't at 100% efficiency so it was low on pressure and causing all sorts of flowrate issues. Good pump and it took no time to get it running smooth. I don't recall the exact numbers but ended up on a leaner version of the trinium.