D&M kit possibilities

[JST]

What are the uses of a D&M kit if you only have the Sagem 500?

[thomez]

You can't use the D&M at all with the 500 as far as I know. The only tuner for the 500 is the mil tool. Only place I know to get them is Maz or every now and then, Ebay.

[JST]

What are the possibilities with the mil tool?

[thomez]

This is from a post from Ryanstones recently. He knows a bit about it if you send him a PM or maybe direct him to this thread.

QUOTE

The D&M kit is for the MC1000 only and doesn't work with your 500. There is a diagnostic tool called MIL/EUL that is a self contained unit for working on the 500. You can use it to modify the air/fuel mix in low/med/high rpms but you can't change maps or raise the rev limit.

[iceracer17]

I recently used one on the dyno.Works pretty nice you can change fuel mixture by +10% to -10% in three areas(low,mid,top).It will also flash codes if there's a fault.