Mil tool knowledge needed.
Mil tool knowledge needed.
I changed over to the "R" kit and the quad is gettin a ton of air with the front being open.So now I'm gettin a pop every now and again and I belive its now lean.Has anyone got a pic of a Mil toll/I don't even know what it looks like or is it easy to use?Anyone got 1 they want to get rid of?
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
On the front of the 500ECU there is a hole with a allen screw in it above that there is a swoosh triangle with narrow and wide in the casting of ECU.If you turn the allen screw toward the wide part of swoosh it will make all the settings richer.!!This screw is VERY touchy!!a 1/8 turn is a big adjustment.If you do get a mill tool you can calibrate throttle and set low,mid,high mixtures.Only way to change rev limiter is to get a bike 500 ECU.
More questions.
I was told a bike ecm would make it faster,true?
From the geginning,how do you use the mil tool?
From the geginning,how do you use the mil tool?
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
cannondale27
Do you have a mil tool?Can you please post a pic of it?
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Here are some of the instructions.
http://www.cannondaleriders.com/vbb/showth...=&threadid=8261
http://www.cannondaleriders.com/vbb/showth...=&threadid=8261
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm