Droping some lbs.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Minus key switch, minus off/run switch. Just kill it with the clutch.
Install a size 9 battery (or a 5 if you are really brave and only ride in warm weather. (Use a Battery Tender Jr. with it).
FMF titanium exhaust.
Minus grab bar.
Remove some seat foam.
Remove either front brakes or rear brake. You don't need both for draggin...
That's it for now...
James
Install a size 9 battery (or a 5 if you are really brave and only ride in warm weather. (Use a Battery Tender Jr. with it).
FMF titanium exhaust.
Minus grab bar.
Remove some seat foam.
Remove either front brakes or rear brake. You don't need both for draggin...
That's it for now...
James
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
http://www.cannondaleriders.com/forums/ind...amp;hl=claas900 When did you see the Abbot's bike?
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Yea I am just looking to some basic stuff,not wanting to build a drag only quad,a duner you could call it.Thanks for the thread 900.I saw Abbotts dale when I went to his shop to get some work done on my first dale.He was in Stover,Mo.He must of had 20 dales in his shop,a couple of GasGas 300s,that TT dale was the best out of all.Bad part,he said the engine was built by South bay.I read some stuff about those guys.Anyway,he is out of dales last I spoke to him,into Taz cars now.I still have one of his old airfilter set-ups.
QUOTE (thedeatons @ May 10 2009, 08:31 PM) <{POST_SNAPBACK}>
Yeah, they are much lighter, but he mentioned a budget...
Well, there's always anorexia
It may not be as easy as buying high $ parts but it is cheap.
I agree on the front shocks. I put Fox on my mod sled & dropped a few pounds . Great ride improvement even if replacing a decent shock to begin with.
Only one downfall I see on this for a quad though. You loose a seal out riding, your'e now riding a twisted trike. Shock sleves may help to keep sand off the shafts & seals some.
Anyone done this mod yet ?
What sled to pick from for proper length ?
Possibly Polaris Dragon, I'll measure mine eye to eye & post back.-------Proflow
Only one downfall I see on this for a quad though. You loose a seal out riding, your'e now riding a twisted trike. Shock sleves may help to keep sand off the shafts & seals some.
Anyone done this mod yet ?
What sled to pick from for proper length ?
Possibly Polaris Dragon, I'll measure mine eye to eye & post back.-------Proflow