Check Your Engines!!!!!!!!!!!!

Message

Deityracer · #61 Post by **Deityracer** » Sun Feb 23, 2003 9:08 pm

wow. where do you work at?? that's pretty cool though. yeah gonna have to get together sometime.

blaze#52 · #62 Post by **blaze#52** » Mon Feb 24, 2003 1:46 am

hey, i have a early 02' blaze, dropped the motor, pulled clutch cover and the timing chain cover, checked all of the bolts, all were tight, motor has approximently 50 hours on it. green locktited all bolts and reinstalled and torqued.

all you guys that pull your clutch cover and look at those bolts is a good idea, but the stud update does not include those bolts. it replaces the bolts in the trans. plate not the trans. cassette. just a thought, something else to check

Sandstorm · #63 Post by **Sandstorm** » Mon Feb 24, 2003 1:49 am

Isn't green locktite permanant??

jcv440 · #64 Post by **jcv440** » Mon Feb 24, 2003 1:52 am

I know red loctite is.... I think the green isn't, but it's heat resistant.(sp)

4punksdad · #65 Post by **4punksdad** » Mon Feb 24, 2003 5:47 am

so pulling off the clutch cover will net the results? I guess I should have read this before I just changed my oil

oh well...............whats 2 quarts of oil anyway?

dawzie · #66 Post by **dawzie** » Mon Feb 24, 2003 12:11 pm

Redneck - you need to pull the motor to get to ALL of the bolts.

Jaybr · #67 Post by **Jaybr** » Mon Feb 24, 2003 12:31 pm

QUOTE

Originally posted by 4punksdad
so pulling off the clutch cover will net the results? I guess I should have read this before I just changed my oil

oh well...............whats 2 quarts of oil anyway?

Don't worry about the oil change. When you pull the clutch cover your in the tranny not engine, and you need to change your tranny oil anyway

4punksdad · #68 Post by **4punksdad** » Mon Feb 24, 2003 1:30 pm

QUOTE

Originally posted by Jaybr
Don't worry about the oil change. When you pull the clutch cover your in the tranny not engine, and you need to change your tranny oil anyway ;)

good point jay

guess my rookie status is really showing

cannondale27 · #69 Post by **cannondale27** » Tue Feb 25, 2003 1:32 pm

You guys can get the motormount update at Quadsource Motorsports 734-941-3484 $29.95 +tax.
Stud Kit cannondale may have some left yet talk to your dealers.
Very Important!

LapTraffic · #70 Post by **LapTraffic** » Tue Feb 25, 2003 4:24 pm

what was the ballpark cost on the kit?

Cannondaleriders

Check Your Engines!!!!!!!!!!!!

motor mount update