Axle specs.

Message

Dachshund · #1 Post by **Dachshund** » Wed Apr 23, 2008 5:52 am

Just some information from the axles I have. I had a hard time getting any accurate info when I was looking for a wider axle, so here is what I have measured at the widest setting on each axle with stock hubs. Hope this will help someone else.

Stock- WMS to WMS-31 1/4"
Dura Blue- WMS to WMS-35 9/16"
Moto- WMS to WMS-35 11/16"
LSR- WMS to WMS-36 11/16"

WMS=Wheel mounting surface.

Also some hub widths are as follows:
Stock- 2"
TRX250X- 2 3/4"

Other hubs have been used by other people but I personally have not verified any other's.
These would be: 450R/400EX, G-Force 450R/400EX, and Yamaha YFZ/Raptor. Some have had good luck while others not so much.

cannondale27 · #2 Post by **cannondale27** » Mon Apr 28, 2008 11:37 am

This one should go in faq. Very nice. Thanks Dachshund!

kdeal · #3 Post by **kdeal** » Mon Apr 28, 2008 3:17 pm

Moved per your request.

UpsMan · #4 Post by **UpsMan** » Mon Jun 02, 2008 4:35 pm

Hub width for trx450r is 2 5/8 , slides right on axle. Rather, I should say the dale hub slides right on the honda axle, so I'm assuming the reverse is true.