Posted: Wed Apr 23, 2008 5:52 am
Just some information from the axles I have. I had a hard time getting any accurate info when I was looking for a wider axle, so here is what I have measured at the widest setting on each axle with stock hubs. Hope this will help someone else.
Stock- WMS to WMS-31 1/4"
Dura Blue- WMS to WMS-35 9/16"
Moto- WMS to WMS-35 11/16"
LSR- WMS to WMS-36 11/16"
WMS=Wheel mounting surface.
Also some hub widths are as follows:
Stock- 2"
TRX250X- 2 3/4"
Other hubs have been used by other people but I personally have not verified any other's.
These would be: 450R/400EX, G-Force 450R/400EX, and Yamaha YFZ/Raptor. Some have had good luck while others not so much.
Stock- WMS to WMS-31 1/4"
Dura Blue- WMS to WMS-35 9/16"
Moto- WMS to WMS-35 11/16"
LSR- WMS to WMS-36 11/16"
WMS=Wheel mounting surface.
Also some hub widths are as follows:
Stock- 2"
TRX250X- 2 3/4"
Other hubs have been used by other people but I personally have not verified any other's.
These would be: 450R/400EX, G-Force 450R/400EX, and Yamaha YFZ/Raptor. Some have had good luck while others not so much.
