battery and oil filter
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
I have been using the odyssey PC545 for the last year. seems to be holding up pretty good and cranks that 14.5:1 piston over no problem. little bit bigger then stock so you have to modify the battery tray.
You could try the PC310 as it should fit in the stock battery holder.
http://www.odysseyfactory.com/powerspecs.html
You could try the PC310 as it should fit in the stock battery holder.
http://www.odysseyfactory.com/powerspecs.html
Ok i bought the ytx 9 bs($89.00) so I can get this running. Nobody stocks the other batterys listed above Battery has 12.85 volts fuel pump is running and the starter is running spinning . Just wont start. every once in awhile I will get a chug out of it . Could it be fouled plugs if so where are they located? Any help is great i would love to ride in the next two weeks when im on vacation.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
QUOTE (djslyde @ Jul 30 2008, 09:07 PM) <{POST_SNAPBACK}>
I need all the help i can get. Spun fly wheel as in if i were to try to move it, it would move easy? If thats the case than no. I spin it and it turns the fuel pump on and i hear gas pumping. I am going to print out that the efi trouble shooting now. Thanks
the pump will primp couse the ecu thinks the motor is turning over. You really shouldn't be able to turn it over by bare hand. If the nut in the center stays put and the flywheel turns then you have found your problem. Or get a 17mm socket take off the nut and locking washer and look for the key way slot,the slot should line up with the "C" on cannondale on the flywheel.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm