Electrical corrosion

Message

cannondale27 · #1 Post by **cannondale27** » Sun Mar 27, 2005 12:55 am

The evil substance can be found everywhere a wire is.This relay is junk corroded the little coil wire right off.I am working on a solidstate relay or Wistech is working on sealed ones.This relay was only one year old!

cannondale27 · #2 Post by **cannondale27** » Sun Mar 27, 2005 12:56 am

Another of actual corrosion

cannondale27 · #3 Post by **cannondale27** » Sun Mar 27, 2005 9:44 am

All grounds and plugs are also vulnerable to this.Take the time to put Dielectric grease in all plugs and clean/tighten all grounds at batt,fuel reg,left headlight bracket(small ground wire)Will save many headaches.

MrSlithers · #4 Post by **MrSlithers** » Tue Apr 26, 2005 3:33 am

Im doin that as we speak. But, i'd like you to do me a little favor if you have a wiring harness and a camera handy. I am color blind so therefore I have a very hard time figuring out what wires are what so im looking for the 3 wires the key switch plugs into. So if you can take pics or lemme know where they are at, that'd solve my push button problem.