Rated-X arms
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
I assume you are talking about the bottom one.
I just did this install too and it was the bottom that gave me a headache. That nut is almost to big because it rubs on the inside right?
I filed just a bit off the flange of that nut so it didnt rub.
Then it went on great. Also I took it off and put it on the ball joint once just to get it threaded a bit. Then installed it
One thing is for sure that nut is NOT coming off during a ride!!
mike
I just did this install too and it was the bottom that gave me a headache. That nut is almost to big because it rubs on the inside right?
I filed just a bit off the flange of that nut so it didnt rub.
Then it went on great. Also I took it off and put it on the ball joint once just to get it threaded a bit. Then installed it
One thing is for sure that nut is NOT coming off during a ride!!
mike
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
I'm thinking that would have an adverse affect...
Your pushing down on the front end, and the tires are being pushed up, and the shocks are pushing the a-arms down, doing that would actually try to pull them out I think
The washers have worked for the top, but we have to modify some of the washers to work on the bottom.
Your pushing down on the front end, and the tires are being pushed up, and the shocks are pushing the a-arms down, doing that would actually try to pull them out I think
The washers have worked for the top, but we have to modify some of the washers to work on the bottom.