$$$$ shipped back to you.
Here is a picture of my harness, basically it is gutted, all extra grounds removed, and moved up to mount on rectifier. 3 relay setup (factory, fan, fuel pump) along with in line fuses. This is a top notch job. You can either keep or remove the headlight/tailight wires.
Paypal to: haydugel@zoomnet.net
I will pm you with the address to ship the harness to. Your harness must be in working order, and CLEAN when shipped.
Wiring harness upgrade!
QUOTE
Originally posted by Craig_C
May be a dumb question or two...
Will it work with a fuel pump re-located? Yes, actually if you move it to the rear, he can lengthen your factory wires, and re-seal them, to wheatever length you wish.
Is it smaller and easier to work with than the stock wiring har-mess?
smaller and easier yes. .May be a dumb question or two...
Will it work with a fuel pump re-located? Yes, actually if you move it to the rear, he can lengthen your factory wires, and re-seal them, to wheatever length you wish.
Is it smaller and easier to work with than the stock wiring har-mess?
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm