THE RACE

Message

dalewannbe · #1 Post by **dalewannbe** » Thu Oct 05, 2006 5:40 pm

Looking for who's in.

I hope to redeem myself after last years race, which resulted in a cracked frame and motor case 60 seconds into the race.

I believe 27, wanablaze, RX440 and XCdale are going to make the trip again.

Its a unique course with a lot of straight aways. Pretty rare to be able to get into 5th gear tapped out like this. I wouldn't know since I didn't make it that far last year, but 27 had a good time!

I'm callling Wistech out, and Commander420.

Guy310 · #2 Post by **Guy310** » Fri Oct 06, 2006 1:51 am

Where is it and can you race effectively with an MX setup on the quad?

cannondale27 · #3 Post by **cannondale27** » Fri Oct 06, 2006 11:57 am

Guy you might get away with it if you ran 4-1 offset but some areas are tight.We need to talk Dalewannabe into borrowing you one of his frontends.Could help switch it night before.This one is a blast!Haydug was there last year also.

http://www.omanationals.com/2006omaschedule.php

Here is some pics from last year:

dalewannbe · #4 Post by **dalewannbe** » Fri Oct 06, 2006 1:09 pm

QUOTE (Guy310 @ Oct 5 2006, 08:51 PM) <{POST_SNAPBACK}>

Where is it and can you race effectively with an MX setup on the quad?

There would be a couple tight spots I'm guessing, but I would gladly borrow you any parts needed.

Guy310 · #5 Post by **Guy310** » Fri Oct 06, 2006 10:16 pm

Do you have any 4+1 offset front wheels?

dalewannbe · #6 Post by **dalewannbe** » Mon Oct 09, 2006 1:06 pm

QUOTE (Guy310 @ Oct 6 2006, 05:16 PM) <{POST_SNAPBACK}>

Do you have any 4+1 offset front wheels?

Is that honda offset?

then yes I do

Guy310 · #7 Post by **Guy310** » Mon Oct 09, 2006 6:15 pm

Yeah, they are Honda bolt pattern. I have a set of Razr2's I would mount on the wheels. I think the 4+1's should bring me down to 48" in the front and I will narrow my axle up a little bit to match. I need to figure out what time we will meet and how I could find you. Thanks again.

dalewannbe · #8 Post by **dalewannbe** » Tue Oct 10, 2006 1:15 pm

QUOTE (Guy310 @ Oct 9 2006, 01:15 PM) <{POST_SNAPBACK}>

Yeah, they are Honda bolt pattern. I have a set of Razr2's I would mount on the wheels. I think the 4+1's should bring me down to 48" in the front and I will narrow my axle up a little bit to match. I need to figure out what time we will meet and how I could find you. Thanks again.

I have tires on the rims. Finding me won't be a problem. Just look for all the cannondales. I live about 10 minutes from the race location so we could meet up anytime before the race as well. I don't know when 27 is coming down? I would think 48 inches you would be fine, kinda tight, but nothing you can't fit through.

cannondale27 · #9 Post by **cannondale27** » Tue Oct 10, 2006 1:42 pm

We need to get in touch.I have a couple guys from town going also though.

Guy310 · #10 Post by **Guy310** » Tue Oct 10, 2006 2:59 pm

I will be there bright and early Saturday morning to sign up and walk the course. Thanks again for the help.