Hiper wheels offset etc.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
lol ur right cpthook, but i cant find my camera or i would have done it first.
badvox: u have one more 1/2" spacer on each side than me as i thought.how wide is ur rear end with that?50" or wider.this is another thing.u only have 1 gold washer on each side and i have 3 on each side.i think that prooves that i need one more spacer on each side.now does anyone have any?
guys im sorry this is being made harder than it should be by myself i cant get a pic though until i get my camera found.ill try.i could draw what i have and scan with my 50 pc crayola set my mommy bought me.lol
kyle
badvox: u have one more 1/2" spacer on each side than me as i thought.how wide is ur rear end with that?50" or wider.this is another thing.u only have 1 gold washer on each side and i have 3 on each side.i think that prooves that i need one more spacer on each side.now does anyone have any?
guys im sorry this is being made harder than it should be by myself i cant get a pic though until i get my camera found.ill try.i could draw what i have and scan with my 50 pc crayola set my mommy bought me.lol
kyle
QUOTE
Originally posted by hnnblehscnnble badvox: u have one more 1/2" spacer on each side than me as i thought.how wide is ur rear end with that?50" or wider.this is another thing.u only have 1 gold washer on each side and i have 3 on each side.i think that prooves that i need one more spacer on each side.now does anyone have any?
kyle [/B]
kyle [/B]
Kyle we have exactly the same setup. Instead of 3 gold washers on the outside I have an extra angled (cone) spacer. I could put that on the inside of the hub but that would make it too wide. If there is such a thing. with the 4 in there I am definitely at 50"
I think I may have 2 extra angled spacers. Let me check tonight.
mike
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
ok mike if u have the angled spacers how much.ill just count those as another regular spacer on each side.i will then have angle,1/2, 1/2, 1/2, angle, hub,gold washer,castle nut, cotter pin on each side.should be at or just below 50 which is fine.glad i we got it sorted out, and thanks all of you for the help.
another question regarding hipers only the fronts.i got mine from maz and he had one front apart and didnt have, what i just learned was supposed to be in between the carbon fiber and the aluminum on both sides, the gasket.i called hiper after trying to silicone it and everything with some luck but still slow leak and they told me i have an older model that needs a gasket on both sides instead of new model where it uses o rings like ont he rears.so usamoto is checking it out for me but was wondering if any of u have some or if i should get gasket paper and make some or try some more with silicone.i think i have an idea on how to do it this time with silicone.i know everyone call me a tard.
:drink:
kyle
another question regarding hipers only the fronts.i got mine from maz and he had one front apart and didnt have, what i just learned was supposed to be in between the carbon fiber and the aluminum on both sides, the gasket.i called hiper after trying to silicone it and everything with some luck but still slow leak and they told me i have an older model that needs a gasket on both sides instead of new model where it uses o rings like ont he rears.so usamoto is checking it out for me but was wondering if any of u have some or if i should get gasket paper and make some or try some more with silicone.i think i have an idea on how to do it this time with silicone.i know everyone call me a tard.
:drink:
kyle