02 cannibal rear shock specs
-
cdalerider92
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
Canniboomer
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Your machine would have the Ohlins CN 1770, and would use a lower 10mm mount bolt.
The later CN 1771 for the Cannibal and Speed has lower bushings for a 12mm bolt. Otherwise, the shocks are identical. That Ohlins number is stamped on the head on the shock, opposite from the Cannondale number.
Glamis, Blaze and Moto shocks have different valving and springs, but also fit exactly the same. If you are cruising ebay, beware of sellers that don't know the difference between Cannondale Motorcycle and ATV shocks -- They are not interchangeable, but can look very similar in pictures. Lower bushings can be swapped or bored, and swingarms can be drilled out larger to suit.
I have shocks here used, and new, and misc parts,.... different springs etc.
But for any service to YOUR shock, member cannondale27 is the man for that.
http://www.cannondaleriders.com/forums/ind...hp?showforum=80
The later CN 1771 for the Cannibal and Speed has lower bushings for a 12mm bolt. Otherwise, the shocks are identical. That Ohlins number is stamped on the head on the shock, opposite from the Cannondale number.
Glamis, Blaze and Moto shocks have different valving and springs, but also fit exactly the same. If you are cruising ebay, beware of sellers that don't know the difference between Cannondale Motorcycle and ATV shocks -- They are not interchangeable, but can look very similar in pictures. Lower bushings can be swapped or bored, and swingarms can be drilled out larger to suit.
I have shocks here used, and new, and misc parts,.... different springs etc.
But for any service to YOUR shock, member cannondale27 is the man for that.
http://www.cannondaleriders.com/forums/ind...hp?showforum=80