A Arms!?!?!?!

Message

Jaybr · #11 Post by **Jaybr** » Tue Jan 13, 2004 4:27 am

Dust, sorry the post got off topic,

Houser, Herman, Gibson, Walsh, and Diamond Racing all make +3's for the Dale in long travel.

I don't think you can get +3's in standard travel, but there are some +2's available.

Brad77 · #12 Post by **Brad77** » Tue Jan 13, 2004 4:44 am

Eyeball engineering also make +3's in long travel.

Yes +3 arms will require a 19 inch shock. Most +2 arms use the stock 16 inch shocks.

Jaybr · #13 Post by **Jaybr** » Tue Jan 13, 2004 1:28 pm

Like Brad says, the long travel arms will require longer shocks.

My advice is look close at the +2's, I know many use stock shocks but some require odd size shocks. When i talked to LSR their arms required 17.25" shocks or something close to that.

CANNIBALKID · #14 Post by **CANNIBALKID** » Tue Jan 13, 2004 1:52 pm

so you couldn't run lsr arms +2 with lets say blaze shocks???

Jaybr · #15 Post by **Jaybr** » Tue Jan 13, 2004 1:56 pm

QUOTE

Originally posted by CANNIBALKID
so you couldn't run lsr arms +2 with lets say blaze shocks???

You could run them, but the shocks would be a little short so you wouldn't get full travel out of the front end.

haydug · #16 Post by **haydug** » Tue Jan 13, 2004 2:20 pm

Houser makes a +1 LT design, but set up for 16" shocks. These are super heavy duty arms, and would be my first choice. I know a guy on this site that has a set of used ASR +2's, and I don't think he is asking that much for them.

KYmxracer52 · #17 Post by **KYmxracer52** » Tue Jan 13, 2004 3:07 pm

Lonestar also use to offer a +3 set in standard travel, and like said before also uses 17.25" shocks.

haydug · #18 Post by **haydug** » Tue Jan 13, 2004 4:32 pm

There are 5 sets of +1 red LT for the 16" shocks. These are the old design with bushings instead of needle bearings where they mount to the frame. I am trying to strike a deal on all 5 sets as we speak. I am also waiting on a call back for +3's.

+1 LT with standard shocks: retail $875
Special on these 5 sets: $650
First come first serve on these, after they are gone, no more deal.

here is a link to the arms: http://www.houser-racing.com/aarms_lt.htm

NRath · #19 Post by **NRath** » Tue Jan 13, 2004 4:58 pm

QUOTE

Originally posted by haydug
here is a link to the arms: http://www.houser-racing.com/aarms_lt.htm

Those do look like a well put together set of arms! Some zerks are the only thing missing. I like that they're using some decent seals at the frame. If only my pockets were a little deeper, I'd be calling you to order a set of those to fit my 16" shocks!

CANNIBALKID · #20 Post by **CANNIBALKID** » Tue Jan 13, 2004 5:07 pm

i'll take a set of the +1's