blaze shocks setup for xc

Shocks, a-arms, swingarms, tires, brakes, etc..
Post Reply
Message
Author
Psychosis
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#1 Post by Psychosis »

Get ahold of jeff@thequadshop. He'll set you up. I'll help w/what he told me that I can remember.

He said he likes to put rebound on full if I remember right which is the softest setting. I myself usually ride about 3 clicks up from there though and am just over 150lbs w/gear. I keep compression at different rates but usually about 5-8 clicks from the softest setting. Seems to be the best for me but try some things out and see what you like. Adjust and you'll find your likings but it'll take awhile.

blaze#52
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#2 Post by blaze#52 »

i moved the front shocks top spring mount up to its top most position, and the rear i backed off the adjuster to where the spring had just a slight preload on it, I did this to try to lower the quad, fronts, if it is a stricly woods race i run, 1 click compression, abour 8-9 rebound, bout the same on the rear, I wiegh bout 170 with gear.

Post Reply