Updating my tie-rods/ends?

Message

exracer12 · #1 Post by **exracer12** » Fri Mar 25, 2005 9:55 pm

what other tie-rods and ends will fit the cannibal with out doing modifications? will they fit from a 400ex?

Derno24 · #2 Post by **Derno24** » Fri Mar 25, 2005 10:16 pm

Well you can modify a set of 400ex's to fit, but I believe they will hit the frame. Or you could get a set of improved ends from Brad at Black Widow.

exracer12 · #3 Post by **exracer12** » Fri Mar 25, 2005 11:56 pm

price range on the black widow ones? and im just worried that the way these are built, that it will just pop off when riding hard?

is there a web site for black widow?

Josh · #4 Post by **Josh** » Sat Mar 26, 2005 12:13 am

www.blackwidowatv.com

Derno24 · #5 Post by **Derno24** » Sat Mar 26, 2005 12:21 am

I think $38 for the set. I also have never seen one pop off. Although I am sure it is possible if you leave it go for A really long time.

claas900 · #6 Post by **claas900** » Sat Mar 26, 2005 2:41 am

..id like to find a sealed ball joint also.

MotoX_Racer07 · #7 Post by **MotoX_Racer07** » Sat Mar 26, 2005 5:43 pm

Go to www.rodendsupply.com They have the best tie rod ends I have seen yet. I can't wear these things out or get any play out of them. Here are the part numbers: You will need two XFR8 (right side) and two XFL8 (left side) They are pretty cheap too ... I paid like 8 bucks each for them a year ago. They are teflon injected with an aluminum body. The number is 1-800-284-2902 ... Check them out! You won't be disappointed.

cannondale27 · #8 Post by **cannondale27** » Sun Mar 27, 2005 9:38 am

I believe those are the ones BlackWidow sells.Retroz also was getteing them.I have them and like said they seem indestructable.Mine are stainless though teflon injected.

acarli3 · #9 Post by **acarli3** » Sun Mar 27, 2005 4:09 pm

sounds right. Brad at Blackwidow ATV has them new and as cheap as you'll find them.

Cannondaleriders

Updating my tie-rods/ends?

Updating my tie-rods/ends?

.

This is the place