some help on this
Posted: Mon Jan 09, 2006 7:56 am
http://www.cannondaleriders.com/vbb/showth...ght=ball+joints
Rickystator has some sweet ball joints for the 250R with 16mm shanks. If you have the older style a arms, with the Eye at the end, instead of the arms ending in the circle itself, you can cut the eye off, bang a bushing in there and then use a ball joint with a thin nut on the outside and inside. That's what I did to mine, it seems solid. I just did the lowers because they get all the abuse. You have to get some adapters for the spindles though, I got the adapters from Winkey. They are little aluminum cones.
WJR
http://www.rickystator.com/pages/ATV_Hardware.html
i got 4 ball joints from him, i would like to make a +1 do you add 1' to the end?
Rickystator has some sweet ball joints for the 250R with 16mm shanks. If you have the older style a arms, with the Eye at the end, instead of the arms ending in the circle itself, you can cut the eye off, bang a bushing in there and then use a ball joint with a thin nut on the outside and inside. That's what I did to mine, it seems solid. I just did the lowers because they get all the abuse. You have to get some adapters for the spindles though, I got the adapters from Winkey. They are little aluminum cones.
WJR
http://www.rickystator.com/pages/ATV_Hardware.html
i got 4 ball joints from him, i would like to make a +1 do you add 1' to the end?