450R wheels on my cdale

Message

banzairx7 · #1 Post by **banzairx7** » Fri Feb 24, 2006 12:48 pm

I picked up some new(barely used) front wheels and tires from a 450R for my cdale. It seems like the 450R might use a tapered lug nut? The wheel studs fit very loosely in the holes in the wheel. There are metal inserts in the wheel which I thought might be for the different lugs. If it does use tapered lugs are they the same thread and where do I get some for cheap?

Pro400EXC · #2 Post by **Pro400EXC** » Fri Feb 24, 2006 1:00 pm

yes it uses tappered lugs...all hondas do.

Try local automotive store. there just 19mm lug nuts..maybe 17mm i 4get.

harleypitbull1 · #3 Post by **harleypitbull1** » Mon Feb 27, 2006 10:07 pm

17 mm I am pretty sure.

ABM-CANNIBAL · #4 Post by **ABM-CANNIBAL** » Mon Feb 27, 2006 10:35 pm

You can also order them from Rocky Mountain ATV. They are $0.55 ea.

cannondale27 · #5 Post by **cannondale27** » Mon Feb 27, 2006 10:58 pm

Warning I dont know if they are all the same but my Dale the threads didnt go down all the way like a Honda when I put the tapered nuts on the threads in the nut got messed up then when I took the nuts off a few of the studs got messed up because of the nut being shot.

banzairx7 · #6 Post by **banzairx7** » Mon Feb 27, 2006 11:02 pm

I found them on rocky mountain- the day after I placed an order. Isn't really worth the shipping costs for $12 worth of parts. I'll probably hit up my local honda dealer for them.

I'll take a look at the stud thread length. Worst case I'll thread them a little more.

cannondale27 · #7 Post by **cannondale27** » Tue Feb 28, 2006 1:17 am

That will work.It wont take much.It only messed up the first two threads in the nut.Be prepared for sticker shock when you price the Honda lug nuts.

badvox · #8 Post by **badvox** » Tue Feb 28, 2006 2:15 am

QUOTE

Originally posted by banzairx7
I found them on rocky mountain- the day after I placed an order. Isn't really worth the shipping costs for $12 worth of parts. I'll probably hit up my local honda dealer for them.

I'll take a look at the stud thread length. Worst case I'll thread them a little more.

So u need 8? I will look at the shipping from cali to where Mass?
I have a whole box of tapered lugs. I will send 'em out to ya.
If you still need them lets figure out shipping and get r done

badvox · #9 Post by **badvox** » Tue Feb 28, 2006 5:52 am

Man I just checked what I have left and they are of course for minis

DLUG10mm is the part number so I dont think they will fit.

Anyone need mini lugs