Page 1 of 1
Posted: Tue May 01, 2007 11:34 am
by nastylilcannibal
Has anyone put the G force hub extender (wheel spacer) on the rear of their quad? I ordered a set for a 400ex is there any reason they would not work?
thanks
nate
Posted: Tue May 01, 2007 1:48 pm
by cdsracer
I have a set (honda 400ex) on my Cannondale with a lonestar rear axle. They slide on real nice. However, they will be VERY difficult to install on a stock axle. The splines on a stocker are beefier and the hub extenders will have to be pounded/pressed on. My Dad and I did it on his Cannibal, and they ended up fitting after a lot of sweat.
Posted: Tue May 01, 2007 3:37 pm
by nastylilcannibal
I have a set (honda 400ex) on my Cannondale with a lonestar rear axle. They slide on real nice. However, they will be VERY difficult to install on a stock axle. The splines on a stocker are beefier and the hub extenders will have to be pounded/pressed on. My Dad and I did it on his Cannibal, and they ended up fitting after a lot of sweat.
thats good to hear... I guess i would rather them take some poundin then to have slop!
Posted: Wed May 02, 2007 12:45 am
by quadracer500
i have a set on my blaze with the stock axle , i used a propane torch to heat the hubs in the spline area and then with very little persuasion from a hammer and a two by four they went on easily.
rich
Posted: Tue May 22, 2007 4:00 am
by Sand_Blaster
i have a set on my blaze with the stock axle , i used a propane torch to heat the hubs in the spline area and then with very little persuasion from a hammer and a two by four they went on easily.
rich
I also bought a pair and tried to fit them on, I gave up and tried selling them lol.
Posted: Tue May 22, 2007 11:17 pm
by hawksd1
thats good to hear... I guess i would rather them take some poundin then to have slop!
Yeah thats exactly what I did with mine a lil pounding with 2x4 and every thing came out sweet and I jump pretty hard with mine at hollister alot....no problems yet and love the width change
Posted: Wed May 30, 2007 2:43 pm
by yamadjs08
How much width do these add to a cannondale? Anybody running these with a 4+5 honda offset rear rim?