Page 1 of 1
Posted: Sun Dec 02, 2007 2:58 pm
by NotSoYoungAnymore
I bought a used Denton stabilizer without the manual, and I can't seem to get it in the correct locations so it doesn't bind.
Any advice or pics of a stick style stabilizer installation would be a huge help!
Thanks
Posted: Sun Dec 02, 2007 3:08 pm
by cannondale27
I will take a pic in a minute.
Posted: Sun Dec 02, 2007 3:13 pm
by cannondale27
Here you go.[attachment=5128:Denton_Damper.jpg]
Posted: Sun Dec 02, 2007 3:13 pm
by UpsMan
[attachment=5129:DSC01417.JPG][attachment=5130:DSC01418.JPG][attachment=5131:DSC
01419.JPG] I hope this helps.
Posted: Sun Dec 02, 2007 3:19 pm
by cannondale27
There you have both styles!
Posted: Sun Dec 02, 2007 3:30 pm
by NotSoYoungAnymore
Thank you, gentlemen.
Posted: Sun Dec 02, 2007 5:50 pm
by rayspeed
Great pics, none of those are like how I did my rebuildable denton as I used the existing tabs on the stem and mounted it to the other side (left side if you are sitting on the quad) I did have to drill out the holes in the tabs to 5/16" which is a challange but can be done.
I have a non rebuildable type and could not get it to work that way but if I use the collar on the stem and go to the other side I now see that it can work.
Ray