what shock cover fits

Shocks, a-arms, swingarms, tires, brakes, etc..
Post Reply
Message
Author
kevin444
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#1 Post by kevin444 »

looking for some after market covers for the front "ohlins-no reso" and rear "with reso". some sites offer short or long travel covers.....which will work for us and does anyone got any goos sites?

thanks,

thedeatons
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#2 Post by thedeatons »

I use ShockPros. They are MUCH thicker than the other guys and actually last a LONG time. Mine still look perfect from two years ago.

You can call them and give them your shock measurement, but basically they have a standard travel Ohlins cover that will fit.

speedracer
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#3 Post by speedracer »

I bought some shockpros for a 250r,they fit fine.

kevin444
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#4 Post by kevin444 »

thanks guys......

ljdbn
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#5 Post by ljdbn »

QUOTE (kevin444 @ Jan 27 2009, 09:29 PM) <{POST_SNAPBACK}>
thanks guys......

I use moose or dirtskins, I get them from Dennis Kirk, I get the ones for ltz400 but they are the same as a 250r. the moose covers last really good, I have one set on our kfx400 w/ ohlins that are 6 yrs old and have seen alot of XC race time that still look new. I use black on everything, and the dirtskinz are thicker, but they seem to get stained on the white graphics while the moose clean-up well and always look new.

jim

thedeatons
Posts: 0
Joined: Wed Mar 10, 2021 10:41 pm

#6 Post by thedeatons »

Hey guys... Here is the Shock Pros .pdf with information and part numbers, notice Ohlins/Elka listed at the bottom...

Post Reply