400EX Rear Wheel Hubs?

Message

Dale512 · #1 Post by **Dale512** » Tue Jul 01, 2003 9:16 pm

I've heard that Stock 400EX Rear Wheel Hubs fit on the C-dales and make it wider. Is this true?

Thanks

Dale512 · #2 Post by **Dale512** » Wed Jul 02, 2003 9:27 pm

Anybody?

JST · #3 Post by **JST** » Thu Jul 03, 2003 9:58 am

how much wider???

Dale512 · #4 Post by **Dale512** » Mon Jul 07, 2003 12:16 pm

How much Wider?

cannibal-87 · #5 Post by **cannibal-87** » Wed Jul 09, 2003 12:19 pm

i've heard 2.5" wider

justfine · #6 Post by **justfine** » Thu Jul 31, 2003 1:33 am

Ya, I would be really interested in the specifics on this. anyone?
If It will widen rear by a couple of inches I would love to pick up a set.

justfine · #7 Post by **justfine** » Thu Jul 31, 2003 11:46 am

Is it a really good fit?

Brad77 · #8 Post by **Brad77** » Fri Aug 01, 2003 5:06 pm

Why would the 400ex hubs only fit on a stock axle? I think the splines are the same on the factory and aftermarket axles.

Psychosis · #9 Post by **Psychosis** » Fri Aug 01, 2003 7:05 pm

I'm not sure on much about it but I've got a set of EX rear hubs ready to go on when I get mine back from the shop. I bought them not too long ago b/c somebody told me about 2.5 incheas which was what I wanted. Wider but not too wide for the trails and improved handling. Whether it's true or not I didn't want to pass up getting a new pair for $40. I can measure then once I get mine back and show you the difference though if you'd like.

MXMIKE · #10 Post by **MXMIKE** » Tue Aug 05, 2003 8:01 pm

Here is what I found buy comparing the two.

The dale hub is 2 inches long there is also a 1/2 inch beveled spacer that goes on before the hub.In total 2 and 1/2 inches long.

The 400ex hub is 3 and 1/4 inches long

I think the problem will be the ex hub will fit but not enough thread to put the koter key in to hold the nut.

But I think if you run the ex hub with out the 1/2 inch stock spacer it will work because the ex hubs are offset about 1/2 inch.

I will try and put my ex hubs on my rpm axel this week and let yall kow how it goes.If it works I will post some pics.

Cannondaleriders

400EX Rear Wheel Hubs?

400EX Rear Wheel Hubs?

?

Enquiring minds wanna know........

hmmmmmmmmm.............