Anyone make a +4 arm for the cdale?
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
QUOTE (speedracer @ Mar 13 2009, 10:02 PM) <{POST_SNAPBACK}>
I read that 400ex do,but you have to use the Honda spindles also and I believe calipers too.
If you want to use the dale spindles you can buy a tapered sleeve the goes on the ball joint so it will fit the dale spindle. if you use the honda style try to make sure they are caster&camber adjustable otherwise you will not get the alignment whrere it needs to be.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Hey Guys ,
i do believe that the a-arms from a LTZ fit as well !!
I had a set Moto arms and just checkt on my LTZ and it looks like it could work .
Might be worth trying as there are soo many aftermarket parts for the LTZ around .
I don????t know how it works with shocks , but i had the stock shocks from my cannibal on my LTZ to test my LTZ elkas on the cannibal .
I only had to use some shims to adapt those .
Marcus
i do believe that the a-arms from a LTZ fit as well !!
I had a set Moto arms and just checkt on my LTZ and it looks like it could work .
Might be worth trying as there are soo many aftermarket parts for the LTZ around .
I don????t know how it works with shocks , but i had the stock shocks from my cannibal on my LTZ to test my LTZ elkas on the cannibal .
I only had to use some shims to adapt those .
Marcus
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Hi,
FOr what its worth, I bought a set of Roll Design a-arms for the 400ex and they are a bit wider than the other +3 arms I have not sure what their actual measurement is but it is noticable. (I bought the little SS adapters from Boomer and used the stock spindles etc. It works well except that the shock mounts on the 400ex are a bit further back on the frame, so if you can you have to adjust your shocks forward a bit in the shock holder on the bottom a-arm (My custom axis set allowed me to put both shims on one side of the shock to shift it forward in the arm. )
GOd bless...
Mark
FOr what its worth, I bought a set of Roll Design a-arms for the 400ex and they are a bit wider than the other +3 arms I have not sure what their actual measurement is but it is noticable. (I bought the little SS adapters from Boomer and used the stock spindles etc. It works well except that the shock mounts on the 400ex are a bit further back on the frame, so if you can you have to adjust your shocks forward a bit in the shock holder on the bottom a-arm (My custom axis set allowed me to put both shims on one side of the shock to shift it forward in the arm. )
GOd bless...
Mark
QUOTE (UpsMan @ May 18 2009, 10:40 PM) <{POST_SNAPBACK}>
Lets see them!
Does that front end look familiar?