Page 1 of 2

Posted: Wed Jun 24, 2009 9:26 pm
by kevin444
got stock ohins on my cannibal. what shocks have been used off other quads. i may be able to get a hold of some resi-shocks off some new quads, but not sure what will fit or has been used before.

thanks,

kevin

Posted: Thu Jun 25, 2009 3:41 pm
by jesshamner
None of them are exactly a perfect match. 400ex are close though. YFZ are way off. I think 450r shocks are a little long. 250r might work.

Posted: Thu Jun 25, 2009 4:32 pm
by cdale55
250r shocks are the same length 16 1/4 same as a standard travel dale

Posted: Thu Jun 25, 2009 8:53 pm
by rayspeed
QUOTE (cdale55 @ Jun 25 2009, 09:32 AM) <{POST_SNAPBACK}>
250r shocks are the same length 16 1/4 same as a standard travel dale


However you will need to use or make spacers or washers because the steel mounts top and bottom on a R are much closer together at the tabs.

Posted: Fri Jun 26, 2009 1:26 am
by kevin444
thanks guys, we were playing around with some resi-shocks off a 09' raptor 700. they are pretty damm close, just a little grinding and a spacer or two should get them in there very nicely. how much improvement do you think i will see over my stock "possibly re-valved" ohlins? i already dropped down to a lighter spring, thanks "ray", but still have the hardest front suspension in what seems like the entire las vegas area! really been getting comfortable on this quad with air and speed, but really get beat up. Buddy putting these on his banshee, but they may end up on mine.....i'll keep you all posted.

thanks again....

Posted: Fri Jun 26, 2009 1:40 am
by peterock
I would say that since the raptor is a heavier machine and that is what they are made for, they are still going to be stiff. Just do it right and save yourself some money and frustration and get your fronts valved correctly for your riding style.

Posted: Fri Jun 26, 2009 5:43 am
by joep1219
QUOTE (peterock @ Jun 26 2009, 02:40 AM) <{POST_SNAPBACK}>
I would say that since the raptor is a heavier machine and that is what they are made for, they are still going to be stiff. Just do it right and save yourself some money and frustration and get your fronts valved correctly for your riding style.



i agree with pete, the stockers are a very good shock if not better then any res. shock on other stock machines. i would send them to the shock doc and have them set up for riding and weight. very quality work and a very fast turn around.

Posted: Fri Jun 26, 2009 2:51 pm
by jesshamner
I vote to stick with your stock shocks too. In my experience, the yamaha shocks have been stiff on any other machine. The geometry is usually totally different than a honda which is what the Cdale was based on. But the ohlins are great shocks. The just don't have a rezzie.

Posted: Fri Jun 26, 2009 3:07 pm
by Happyboy
Elka front shocks off a 400ex work great. And the stock ohlins revalved are great but they aren't ad good as a nice rezzie shock setup for you.

Posted: Tue Aug 25, 2009 9:55 am
by Trouble
yfz 450 shocks are awesome with plus 2 arms for me.im 200 lbs though too.