Posted: Wed Mar 31, 2010 7:49 am
Any more updates on this yet ?
Cannondaleriders
A safe place for quads older than the owners
https://cannondaleriders.com/phpbb/
Anyone ever try a long travel rear shock setup?
https://cannondaleriders.com/phpbb/viewtopic.php?f=8&t=20701
Page 6 of 10
Posted: Wed Mar 31, 2010 4:25 pm
glad to see you got that shock some use !!! im getting ready to start using the elka i got from you, do you by chance remember what its setup for???
Posted: Sat Apr 10, 2010 5:44 pm
Hi
Testing is going well have not found any issues yet. Once I get moved into the new house I should be ready to make some Beta test pieces. Should be mid May on those pieces
God bless
Mark
Testing is going well have not found any issues yet. Once I get moved into the new house I should be ready to make some Beta test pieces. Should be mid May on those pieces
God bless
Mark
Posted: Wed Apr 21, 2010 6:12 pm
QUOTE (m_mcgranahan @ Apr 10 2010, 06:44 PM) <{POST_SNAPBACK}>
Hi
Testing is going well have not found any issues yet. Once I get moved into the new house I should be ready to make some Beta test pieces. Should be mid May on those pieces
God bless
Mark
Testing is going well have not found any issues yet. Once I get moved into the new house I should be ready to make some Beta test pieces. Should be mid May on those pieces
God bless
Mark
Does it affect the hide height at all ?
Posted: Sun May 30, 2010 4:04 am
Hi,
I have a ZPS shock setup so I just set extra sag to keep the ride height the same and it really shines in the rough stuff and on big jumps etc cause with the extra travel I can run a lighter spriing rate and still not bottom out when I don't quite downhill that big jump or ... you get the idea.
It is looking good as far as testing goes. I have to find a local shop to partner with and start getting these out there soon :-D
God bless...
Mark
I have a ZPS shock setup so I just set extra sag to keep the ride height the same and it really shines in the rough stuff and on big jumps etc cause with the extra travel I can run a lighter spriing rate and still not bottom out when I don't quite downhill that big jump or ... you get the idea.
It is looking good as far as testing goes. I have to find a local shop to partner with and start getting these out there soon :-D
God bless...
Mark
Posted: Thu Sep 16, 2010 4:34 am
any updates?
Posted: Tue Sep 21, 2010 1:17 am
HI,
Been busy with work and getting settled. At this point I just need to talk to the local CNC shop about a production run.
God bless...
Mark
Been busy with work and getting settled. At this point I just need to talk to the local CNC shop about a production run.
God bless...
Mark
QUOTE (WhiteZee @ Sep 16 2010, 05:34 AM) <{POST_SNAPBACK}>
any updates?
Posted: Tue Sep 21, 2010 7:24 pm
it sucks having a diploma in machine tool tech and no machines 
maybe someday.
maybe someday.Posted: Mon Nov 08, 2010 4:09 am
Anymore news?
Posted: Fri Jan 07, 2011 4:25 am
Hi,
So through the prodding of a member here I am making one more of these and going to do my best to get a quote to produce a small run of these units. I will get more info up as soon as I get a good idea of cost.
THanks
God bless...
Mark
So through the prodding of a member here I am making one more of these and going to do my best to get a quote to produce a small run of these units. I will get more info up as soon as I get a good idea of cost.
THanks
God bless...
Mark